If you don’t know which is the cause, you’ll have to pull the boat and head for the mechanic. But more often than not, the issue arises because the tell-tale is clogged with grit, mud, or a bit of seaweed the engine picked up. This could result from a ruined water pump impeller, which will require service. Disconnect it, and try the key again-there’s a good shot the engine will fire right up. You're looking for the black one with a yellow stripe. Get to the back of the switch panel, and look at the wires. QUICK FIX: You need to disable the emergency kill switch. If the switch is mounted horizontally in a spot where water can pool on it and cause damage, this is a particularly common and annoying issue. It acts as though the lanyard clip has been pulled off, and it prevents the engine from firing. ![]() This could be due to a number of reasons (before you do anything check to make sure the shifter’s in neutral, of course), but when it doesn't even seem to try to catch, there’s a good possibility your emergency cut-off switch has gone bad. Your engine cranks and cranks, but never attempts to catch. ![]() ![]() Today's outboard motors are far more reliable and fuel efficient than those of yester-year, but you'll still want to know how to fix these common problems-and fix 'em fast.
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |